Preparations And Connections; Installing Batteries In The Remote Control; Remote Control Operation Range - Yamaha GX-505RDS Owner's Manual

Preparations and connections

Installing batteries in the remote control

1
3
2

Remote control operation range

DISC 1 DISC 2 DISC 3
3–DISC CD CHANGER
STANDBY
STANDBY
TIMER
/ON
INPUT PRESET/TUNING/BAND A/B/C/D/E
/
PTY SELECT PTY SELECT
R.D.S
MINI COMPONENT SYSTEM GX–505
DIRECTION
OPEN/CLOSE
AUTO REVERSE CASSETTE DECK DOLBY B NR
1
2
3
Notes
• Be sure the polarities are correct. (see the illustration inside the battery
• Remove the batteries if the remote control is not used for an extended
• If batteries leak, dispose of them immediately. Avoid touching the leaked
• Be sure to use the same type of batteries.
• Do not use a new battery and an old battery together.
Notes
• The area between the remote control and the main unit must be clear of
DISC CHANGE OPEN/CLOSE
DIGITAL AUDIO
• Do not expose the remote control sensor to strong lighting, in particular,
YMERSION B.BOOST MUSIC
VOLUME
UP
DOWN
Battery replacement
If you find that the remote control must be used closer to the main
unit, the batteries are weak. Replace both batteries with new ones.
Turn the remote control over and remove the battery
compartment cover by sliding it in the direction of the
Insert the batteries (AA, R6, UM-3 type) according to the
polarity markings on the inside of the battery compartment.
Attach the battery compartment cover.
compartment.)
period of time.
material or letting it come in contact with clothing, etc. Clean the battery
compartment thoroughly before installing new batteries.
large obstacles.
an inverter type fluorescent lamp. Otherwise, the remote control may not
work properly. If necessary, position the main unit away from direct
lighting.
mark.
-5
E