Display assembly
Before disassembling the display assembly, follow these steps:
1.
Prepare the computer for disassembly
2.
Place the computer in Battery Safe mode
3.
Remove the bottom cover
4.
Remove the battery
Disassemble the display assembly:
1.
Remove the display assembly from the computer:
a.
Disconnect the antenna cables from the WLAN module (1).
b.
Disconnect the display cable from the system board ZIF connector (2).
c.
Remove the four Torx T8 2.5 × 4.0 screws (1) that secure the display assembly to the computer.
56
Chapter 5 Removal and replacement procedures for authorized service provider parts
(Preparation for disassembly on page
(Battery Safe mode on page
(Bottom cover on page
(Battery on page
33).
31).
32).
31).