Table of Contents
Advertisement
EXCELL PRECISION CO., LTD
Simple Counting Mode:
Use UNIT key to switch unit to "Pcs", to go into simple counting mode.
1.
Use
NET | GROSS
will show
pressing
NET | GROSS
2.
Select a sampling number, and put appropriate weight on platter, and press
Display will show "
and display will show the sample number.
Unit weight insufficient (
total sample < 20d (d=division)
While sampling, if there is insufficient sample or unit weight insufficient indication " ", the
scale is still usable, but there may be slight inaccuracy.
After Power-off, the scale automatically memorizes the sampling number, and it is available
during the next unit selection as "pcs".
If the setting is "automatic average unit weight ", if the object on platter more than the
previous sampling number more than 5 pcs, and also less than 100% the previous sampling
number, the scale will execute unit weight calibration automatically.
02005302
key, to select a sample number from "10 , 20, 50, 100, or 200". Display
、
、
key.
". The scale will go into counting mode after weight is stable,
): Sample unit weight < 0.2d (d=division) or
P c s
、
、
9
in an sequential order by
key.
UNIT
ZSME300000237
Advertisement
Table of Contents
