Set Mode - Vertex Standard VX-110 Operating Manual

The VX-110 Set (Menu) mode is easy to activate and set. Use the following procedure:
Press the [ F ] key, then press the [ M/V ( SET ) ] key, to activate the Set mode.
Turn the DIAL to select the Menu item number to be adjusted.
Press the [ F ] key momentarily, then rotate the DIAL to adjust or select the parameter to
be changed on the Menu item selected in above step.
After completing your selection and adjustment, press the PTT switch momentarily to
exit the Set mode and exit to normal operation.
Item # Menu Item
1 ALPHA Store Alpha-Numeric "Tags"
2 ARS Enable/disable Automatic Repeater Shift
3 RPT Set the Repeater Shift Direction
4 SHIFT Set the magnitude of the Repeater Shift
5 STEP Setting of the synthesizer steps
6 RESUME Select the Scan Resume mode
7 SCN LMP Enable/disable the Scan lamp
8 RX SAVE Select the Rx-mode Battery Saver interval
9 TX SAVE Enable/disable the Transmit Battery Saver
10 APO Set the Automatic Power-Off time
11 TRX LED Enable/disable the BUSY/TX LED
12 ARTS Activate ARTS operation
13 ARTS BP Select the Beep option during ARTS operation
Select the Polling Interval during ARTS opera-
14 AR ITVL
tion
15 KEY BP Enable/disable the Keypad beeper
16 EDGE BP Enable/disable the Band-edge beeper
17 BELL Select the CTCSS Bell ringer repetitions
18 MON/TCL Select the MON key function
19 LMP MOD Select the LCD/Keypad Lamp mode
20 TOT Set the TOT time
Enable/disable the Busy Channel Lock-out fea-
21 BCLO
ture
22 CLK SFT Shifting of the CPU clock frequency
23 SQL TYP Select the T one Encoder and/or Decoder mode
24 TN SET Setting of the CTCSS Tone Frequency
25 DCS SET Setting of the DCS code
26 DTMF Programming the DTMF Autodialer
27 CW ID Programming/activation of the CW Ider
28 S SRCH Activate the Smart Search
29 SMT MOD Select the Smart Search Sweep mode
30 LK MODE Select the Control Locking lockout combination
31 NAR/WID Select the Operating band width
32 DTMF SP Select the DTMF Autodialer sending speed
33 DT DLY Select the DTMF Autodialer delay time
34 ANI Program and activate the ANI Identifier
VX-110 O
PERATING
Set Mode Summary
Function
M
ANUAL

Set Mode

Available Values
–
ON/OFF
-RPT/SIMP/+RPT
0 - 99.9MHz
5/10/12.5/15/20/25/50 kHz
5SEC/BUSY/HOLD
ON/OFF
OFF/200ms/300ms/500ms/1s/2s
ON/OFF
OFF/30min/1h/3h/5h/8h
ON/OFF
–
OFF/INRANGE/ALWAYS
15 SEC/25 SEC
ON/OFF
ON/OFF
OFF/1/3/5/8/REPEAT
MON/T-CALL
KEY/5SEC/TOGGLE
OFF/1min/2.5min/5min/10min
ON/OFF
ON/OFF
OFF/TONE/TONESQL/DCS
39 Standard CTCSS tones
104 standard DCS codes
–
–
–
SINGLE/CONTINUE
KEY/DIAL/KEY+DIAL/PTT/
KEY+PTT/DIAL+PTT/ALL
NARROW/WIDE
50 ms/100 ms
450 ms/750 ms
–
Default
–
ON
SIMP
0.6MHz
5SEC
ON
200ms
OFF
OFF
ON
–
INRANGE
15 SEC
ON
ON
OFF
KEY
OFF
OFF
OFF
OFF
100 Hz
023
–
–
–
SINGLE
KEY
WIDE
50 ms
450 ms
–
31