Vertex Standard VX-110 Operating Manual page 38

Set Mode
Set Item 31 [ NAR/WID ]
Function: Select the Operating band width.
Available Values: NARROW/WIDE
Default: WIDE
Set Item 32 [ DTMF SP ]
Function: Select the DTMF Autodialer sending speed.
Available Values: 50 ms/100 ms
Default: 50 ms (High speed)
Set Item 33 [ DT DLY ]
Function: Select the DTMF Autodialer delay time.
Available Values: 450 ms/750 ms
Default: 450 ms
Set Item 34 [ ANI ]
Function: Program and activate the ANI Identifier
See page 13 for details.
Set Item 35 [ BATT ]
Function: Indication of the Supply Voltage.
In this mode, press the [ F ] key, then press the PTT key, to exit to normal operation.
Set Item 36 [ SKIP ]
Function: Enable/disable skipping of a memory during scanning.
Available Values: ON/OFF
Default: OFF (Scanner stops when the channel is busy)
36 VX-110 O M
PERATING ANUAL