Timer Mode; Menu ("Set") Mode - Vertex Standard VXA-710 Spirit Operating Manual

T
IMER
The VXA-710 provides both "STOP WATCH" and
"COUNT DOWN" timers. These may be used for a vari-
ety of time-keeping purposes.
1. Press and hold in the
key while tuning the radio
on, to activate the Timer
Mode.
2. Press the MONITOR key to toggle the Timer between
"STOP WATCH" timer and "COUNT DOWN" timer.
If you select the "COUNT DOWN" timer, rotate the
DIAL knob to set the values for the timers (1 minutes
–59 minutes).
3. Press the PTT switch to start/stop the timer.
4. Turning the radio off, then on again, will return the
VXA-710 to normal operation.
46
M
ODE
( "S
M
ENU
The Menu system allows certain aspects of your radio's
configuration to be customized for your personal operat-
ing convenience. We do not recommend that any of the
default settings be changed, however, until you are thor-
oughly familiar with the operation of the VXA-710.
Here is the procedure for initiating Menu configuration
changes:
Press the key, then press the
the Menu ("SET") mode.
Rotate the DIAL selector knob to select the "Main"
Menu, then press the
Rotate the DIAL selector knob to select the "Sub"
Menu item you wish to view and/or modify, then press
the key.
Once you have selected the desired Menu Item, press
the key once to view the current setting for the
item.
Rotate the DIAL selector knob to change the setting
of the item (ON to OFF, etc.).
Press the key again to save your new setting.
Press the PTT key repetitively until the radio exits to
normal operation.
VXA-710 S
PIRIT
" ) M
ET ODE
key, to activate
key.
O M
PERATING ANUAL