User Set Mode - Vertex Standard VX-7200 Operating Manual

The VX-7200 Series includes a "User Set" (Menu) Mode which allows the user to
define or configure various settings, such as Squelch, Display contrast, etc. To acti-
vate the "User Set" (Menu) Mode:
Press the programmable key assigned to the "SET" function.
Select the User Set Mode item you wish to change using the [ P1 ] / [ P2 ] keys,
then use the [ ] / [ ] keys to adjust the setting of the selected item.
Press the [ P1 ] or [ P2 ] key to store the new configuration.
Press [ A ] key to exit to normal operation.
D D
ISPLAY
1 SQL Sets the Squelch Level.
Select the "User" or "Dealer" Scan List.
2 SCN List
3 BEEP Enables/Disables the Key Beeper.
4 BELL Enables/Disables the Bell function.
(alert tone activated by incoming subaudible CTCSS/DCS tone)
Enables/Disables the BUSY/TX LED.
5 Lighting
Set the Control Key Lockout Cofiguration (Key/PTT/Key+PTT).
6 Lock
Select the desired Channel Group.
7 Group
Engages/Disengages Scanning (same as the programmable [ SCAN ] key).
8 SCAN
Engages/Disengages Dual Watch (same as the programmable [ DW ] key).
9 DW
Engages/Disengages Talk Around (same as the programmable [ TA ] key).
10 TA
11 RSSI BEEP Enables/Disables the disabling the RSSI beep.
on: Enables the disabling the RSSI beep.
off: Disables the disabling the RSSI beep.
12 AF MinVR Sets the minimum Audio Volume level.
Sets the Beep Volume level.
13 Beep VR
Sets the LCD Contrast level.
14 Contrast
Sets the brightness of the backlighting of the key and LCD.
15 Dimmer
Note: RSSI BEEP operates in APCO Project 25 Digital System.
16
U
SER
ESCRIPTION
S M
ET ODE
VX-7200 S
ERIES
O M
PERATING ANUAL