Operation Ban Release Time Setting; Operation Ban Release Time Setting Procedure - Konica Minolta bizhub 368 Service Manual

Security Function Ver. 1.01 Feb. 2017
8.8

Operation ban release time setting

• This function is used to set the period of time to be elapsed before the access lock state
is released.
• When the access lock release operation is performed, the machine measures the period
of time set with this function and releases the access lock state after the lapse of the set
period of time.
8.8.1

Operation ban release time setting procedure

1. Call the Service Mode to the screen.
See P.9
2. Press the following keys in this order to display the Enhanced Security screen:
Stop → 0 → Clear
3. Touch [Operation Ban release time].
4. Enter the time from the 10-key pad and touch [END].
NOTE
• The setting time ranges from 1 to 60 min. (default value: 5 min.).
If the Enhanced Security Mode has been set to "ON," however, the value that can
be set should be at least 5 min.
34
8. Service Mode functions
A9HJS1E004DA
A9HJS1E016DA