Security Function Ver. 1.01 Feb. 2017
9. On the Language Select screen, select a language to be displayed on the LCD area of
the control panel, then touch [Fix].
NOTE
• The language selected on this screen is displayed on the Language Selection
screen of Utility.
• Up to 9 languages are selectable. However, Japanese and English are essential
options.
10. Touch [OK] to go back to the firmware update selection screen.
11. Touch [START]. (At this time, the Start key starts blinking red.)
12. Check that the control panel shows the message indicating that the data has been
rewritten correctly ([Downloading Completed]). (The Start key lights blue.)
13. Turn OFF the main power switch.
14. Remove the USB memory.
15. Turn ON the main power switch.
16. Call the Service Mode to the screen.
17. Select [Firmware Version].
18. Make sure if the version of firmware is updated.
41
10. Firmware rewriting
A9HJS1E022DA