Security Function Ver. 1.01 Feb. 2017
NOTE
• More than one firmware data with a single model can be stored in the USB mem-
ory.
In this case, copy the firmware data to the USB memory according to the following
procedures.
1. Make the folder named "FWSelect" (case-sensitive) to the root directory of the
USB memory.
2. Make a folder with any folder name (one byte alphameric characters, maximum
40 characters) in "FWSelect" folder, and store the firmware data to the folder.
[1]
[1] USB memory
Storage folder for a plurality of data
[3]
(Folder name: FW select (Fixed)) *2
Storage folder for firmware data C
[5]
(Folder name: Arbitrary) *2
• *1: Required to start the firmware update screen
• *2: Required only when a plurality of data is stored
3. Turn OFF the main power switch.
4. Connect the USB memory containing the firmware into the USB port on the right side
of the operation panel.
[2]
[3]
[4]
[5]
[6]
[2] Rewriting data folder (Required) *1
Storage folder for firmware data B
[4]
(Folder name: Arbitrary) *2
Storage folder for firmware data D
[6]
(Folder name: Arbitrary) *2
39
10. Firmware rewriting
A9HJS1C019DA
A9HJS1E020DA