Table of Contents
Advertisement
FLEXIDOME corner 7100i IR
–
Intensity level
Set the intensity of the IR beam.
Regional intensity
Select this option to enable the control of IR intensity in 5 zones.
The device has an integrated 360º IR. The integrated IR provides the flexibility to control IR
intensity in 5 zones in order to prevent IR saturation.
Installing the device near a white wall or a white object might overexpose them due to
reflection of the IR light. The integrated IR LEDs are individually adjustable to solve this
effect and optimize the scene.
4.4.8
Enhance
High dynamic range
Select one of the available High dynamic range options below:
–
–
–
Backlight compensation
–
–
Intelligent Defog
With the Intelligent Defog mode feature, visibility can be improved significantly when
viewing foggy or other low-contrast scenes.
–
–
–
Contrast enhancement
Use the slider to adjust the contrast enhancement level.
Sharpness level
The slider adjusts the sharpness level between -15 and +15. The zero position of the slider
corresponds to the factory default level.
A low (negative) value makes the picture less sharp. Increasing sharpness brings out more
detail. Extra sharpness can enhance the details of license plates, facial features and the
edges of certain surfaces but will increase bandwidth requirements.
Temporal noise filtering
Adjusts the Temporal noise filtering level between -15 and +15. The higher the value, the
more noise filtering.
Spatial noise filtering
Adjusts the Spatial noise filtering level between -15 and +15. The higher the value, the
more noise filtering.
Bosch Security Systems
Intelligent: the device automatically optimizes the IR output to the scene to make sure
the image is captured with the correct exposure level and minimal loss of detail.
The Intensity level can still be used to set the maximum intensity value for the
illuminator.
Off - The device is in single exposure mode and the user does not have an increased
dynamic range through HDR.
Optimized DR - Select this mode for scenes with greater dynamic range requirements.
Extreme DR - Further increases performance at an even greater HDR ratio. Due to the
increased HDR ratio, there is a greater risk of HDR artifacts in the scene and on moving
objects.
Select Off to switch off backlight compensation.
Select On to capture details in high-contrast and extremely bright-dark conditions.
Select Extreme to activate an Intelligent Defog mode with enhanced defog capabilities.
Select Auto to activate the Intelligent Defog feature automatically as needed.
Select Off to disable the feature.
User Manual
Configuration | en
2023-10 | V02 | F.01U.407.683
29
Advertisement
Table of Contents
