Licenses; Certificates - Bosch FLEXIDOME corner 7100i IR NCE-7703-FK User Manual

52 en | Configuration
2.
3.
To save the camera settings:
1.
2.
3.
Maintenance log
Download an internal maintenance log from the device to send it to Customer Service for
support purposes. Click Download and select a storage location for the file.
4.8.2

Licenses

This page allows the activation of additional features via acquired license keys.
To install or uninstall a license, type the respective key in the Activation key field and click
Install or Uninstall.
Alternatively, click License file to browse for license files and add them to the device.
The device's unique Installation code and Fingerprint are also displayed in this page and
can be copied to the clipboard by pressing the respective Copy to Clipboard button.
The Installed licenses field lists all licenses currently installed in the device.
4.8.3

Certificates

Add a certificate/file to the file list
Click Add.
In the Add certificate window, select:
–
–
–
Note: When using certificates for mutual authentication, the device must use a solid and
trusted time base. In case the time differs too much from the actual time, a client can be
locked out. Then, only a reset to factory defaults will access to the device again.
Delete a certificate from the file list
Click the trashcan icon to the right of the certificate. The Delete file window appears. To
confirm deletion, click OK. To cancel deletion, click Cancel.
Note: You can only delete certificates that you have added; you cannot delete the default
certificate.
Download a certificate
Click on the download icon and a window opens with base64 encoded text of the
certificate.
Click Set to apply the changes.
2023-10 | V02 | F.01U.407.683
Make certain that the file to be loaded comes from the same device type as the device
to be reconfigured.
Locate and open the desired configuration file. If the configuration file is password-
protected, enter the password.
Click Upload. The progress bar allows monitoring of the transfer. The time remaining is
shown by the message going to reset Reconnecting in ... seconds. When the upload is
completed successfully, the device reboots automatically.
Click Download. A dialog box appears.
Enter a password to protect the configuration file.
Enter a file name if required and save the file.
Upload certificate to select a file that is available:
– Click Browse... to navigate to the necessary file.
– Click Upload.
Generate signing request for a signing authority to create a new certificate:
– Fill in all the necessary fields.
– Click Generate.
Generate certificate to create a new self-assigned certificate:
– Fill in all the necessary fields.
– Click Generate.
User Manual
FLEXIDOME corner 7100i IR
Bosch Security Systems