Front Panel Contrast; Intelligent Ready Mode - Xerox Phaser 7300 Features Manual

Front panel contrast

To make the front panel text more readable, you can adjust the contrast between the text and the
background:
1. On the front panel, with
2. Scroll to
Printer Setup Menu
3.
Press the OK key.
4.
Scroll to
Set Front Panel Contrast
5.
Press the OK key.
6.
Scroll the value until you achieve the desired contrast between the text and the background. The
values range from 1 to 10.
7.
Press the OK key.

Intelligent Ready mode

Intelligent Ready mode is an automated system that monitors the printer's usage and warms up the
printer when you are most likely to need it and puts it into Power Saver mode when you use it the least.
To turn Intelligent Ready mode on or off from the printer's front panel:
1. With highlighted, press the OK key.
Menus
2. Scroll through the menu to
3. Press the OK key.
4. Scroll through the menu to
To change the setting, press the OK key.
To select Intelligent Ready mode or schedule warmup/standby settings using CentreWare IS
software:
1. From your printer's Internet Services home page, click Properties.
2. On the left side of the Properties page in CentreWare IS, click Warmup.
3.
For Warmup Mode, select either Intelligent Ready or Scheduled (if you want to specify the
warmup/standby settings for each day).
4. If you selected Scheduled in step 3, make selections for each day's warmup setting and standby
setting.
5. Click the Save Changes button on the bottom of the page.
Note
Although the front panel selections only enable you to turn Intelligent Ready mode on or off,
CentreWare IS enables you to specify particular printer warmup times.
Phaser® 7300 Color Printer
highlighted, press the OK key.
Menus
by pressing the Up Arrow or Down Arrow key.
.
Printer Setup Menu
Intelligent Ready
using the Up Arrow or Down Arrow keys.
using the Up Arrow or Down Arrow keys.
Printer Features
25