Driver Features; Print-Quality Modes - Xerox Phaser 7300 Features Manual

Driver Features

Print-quality modes

You can choose between different print quality modes to obtain the best combination of speed and print
quality for your job.
Print-quality mode
Standard
General purpose mode for high-speed color printing
I
Produces crisp, bright prints
I
Suitable for most office documents and images
I
Prints at 600 x 600 dpi
I
Enhanced
Highest-quality color prints
I
Richest color and near-photographic detail
I
Prints at 600 x 2400 dpi
I
Draft
Lighter toner usage than standard mode
I
Recommended for draft or interim prints and proofreading only
I
Prints at 600 x 600 dpi
I
Approximate number of pages per minute (ppm) does not include I/O or image processing time. Two-sided (duplex) printing
*
has a slower speed.
Specify the print-quality mode in a supported driver:
Windows 95 / Windows 98 / Windows Me PostScript driver:
I
On the Setup tab, select a print quality by moving the slider.
Windows NT / Windows 2000 / Windows XP PostScript driver:
I
On the Paper/Quality tab, select a print quality by moving the slider.
MacOS 8 / MacOS 9 driver:
I
In the Print dialog box, click on General, select Print Quality from the pull-down menu, then
select the desired mode for Quality.
MacOS X (version 10.1 and higher) driver:
I
In the Print dialog box, select the Printer Features pull-down menu, then select the
Print Quality/Color tab. Select the desired mode for Quality.
Copyright © 2002 Xerox Corporation. All Rights Reserved.
Phaser® 7300 Color Printer
Maximum speed for letter and
A4 size paper*
Plain paper:
30 ppm color
I
37 ppm black-and-white
I
Specialty papers:
10 ppm color
I
15 ppm black-and-white
I
Plain paper
Up to 16 ppm color
I
Plain paper:
30 ppm color
I
37 ppm black-and-white
I
Specialty papers:
10 ppm color
I
15 ppm black-and-white
I
9