Removing The Cutting Unit - Toro Greensmaster eFlex 1021 Operator's Manual

Installing the Cutting Unit (continued)
3. Move the suspension latches
secure the cutting unit to the machine.
4. Move the collar
coupler-shaft groove and insert the hex tube
into the cutting-unit coupler shaft
5. Install the grass basket.

Removing the Cutting Unit

Note:
The hex tube
removed.
1. Move the kickstand to the C
2. Remove the grass basket (if equipped).
3. Move the collar
Note:
out of the transmission-
disengages if you engage the reel drive when the cutting unit is
into the transmission-shaft groove.
This releases tension from the spring.
down to
.
-U -S position.
UTTING NIT ERVICE
9
G404930