Xerox DocuPrint C55 Supplementary Manual page 58

3. Click your mouse once on the Setup Wizard button or open the
Printer menu and select Setup Wizard.
4. When the Setup Wizard Welcome screen appears, click Next >.
5. When the Select NetWare Server dialog box screen appears,
click once on the Install this device on a Bindery Server.
6. Select a server from the drop-down list. Click Next >.
7. If prompted, enter a user name and password for the desired
server and click Login.
8. The Name the Device dialog box screen will appear. You may
enter a new name for the printer you have selected, or keep the
default name. Click Next >.
9. When the Select Queue dialog screen appears, you may select an
existing queue, or create a new queue. To create a new queue,
click the Create Queue button and enter a new queue name, then
click Create Queue again. Once you have either selected a queue
or created a new one, click Next >.
10. The Confirm Choices dialog screen will appear and display the
new Printer Name and name of new Queue information you have
supplied. Click Finish >. The Wizard will pop up a configuration
progress box.
11. After a few moments, the Congratulations dialog screen will
appear and a Startup page will print. Review this page to
VERIFY that your Primary Server and Print Server name agree
with those you chose in Setup Wizard.
12. Run a test print from a software application to verify the
operation of your printer.
N O V E L L N E T W A R E S E T U P 5