Xerox DocuPrint C55 Supplementary Manual page 203

4. From the OS/2 Desktop, go to OS/2 System, System Setup,
Spooler, open Spooler Settings, and confirm that the SPOOLER
Print Priority is set to maximum of 189. If currently set to 189,
go to step 5.
5. Insert your DocuPrint OS/2 Printer Driver diskette into drive a:
6. At the OS/2 Command Prompt, issue this exact command:
lpr -p ps -s xxx.xxx.xxx.xxx a:\sample.ps*
(where xxx.xxx.xxx.xxxx is the IP address of your DocuPrint
Color Laser Printer). If the test page test.ps prints, you have an
OS/2 configuration problem. Make sure that you have
LPRPORTD or LPRMON running. (If not, activate by issuing
the OS/2 command: LPRPORTD or LPMON.) (For LPRMON,
see IBM Documentation for correct parameters.)
7. If your DocuPrint Color Laser Printer does not print the test page,
check with your TCP/IP, domain, system administrator to confirm
the correctness of all TCP/IP settings and configurations. If you
are unable to print, call your XEROX representative.
NOTE: Create a test file with the name sample.ps by opening any
word processor/text editor. Create a document, then print the
document using the Print to File option in the PostScript Job
Properties window of the DocuPrint C55mp printer. Save the file
with the name sample.ps.
O S / 2 12