C Configure console (for status monitoring)
1. Select the C option from the menu and the printer will return the
following prompt:
Config console for status monitoring
1 (No)
2 (Yes)
2. Select desired option and press [RETURN]. You will be
returned to the Main menu.
D Display network interface settings
1. This command will display a list of parameters regarding the
configuration of the network interface card in your printer and
return to the Main menu.
E Set Ethernet options
1. Select the E option from the menu and the printer will return the
following prompt:
Ethernet connector Auto Select override
1 (BNC)
2 (RJ45)
3 (Do not override)
2. Enter the desired option or "3" to make no changes and press
[RETURN]. The next Ethernet Option will be displayed:
Telnet Security
1 (Off)
2 (On/New Password)
3 (No Change)
3. Enter the desired option or "3" to make no changes and press
[RETURN]. If option 2 was selected you will be prompted to
enter a new password the you will be returned to the Main menu.
U N I X 29