Xerox DocuPrint C55 Supplementary Manual page 131

4. The Network dialog will appear. Select the Protocols TAB.
5. Check the list of installed network components for the following
items:
DLC Protocol
6. If you have elected to run CentreWare DP you must also have
loaded Novell IntranetWare Client, Novell NetWare Client 32,
a Novell server on the network, and an NWLink IPX/SPX
Compatible transport protocol component. You may also
discover printers that have been assigned a TCP/IP address.
7. As required, install any components not listed and restart the
system.
8. Once rebooted, select the Start button and Settings, then select
the Printers folder. The printers window will appear.
9. Verify that you have selected the correct driver for your printer.
10. Right mouse click on the Printer icon and select Properties.
11. Select the Ports TAB.
12. Verify that the port name in the Print to the following port list
matches the name given when the printer was installed. If
necessary reselect the correct name.
13. Start an application and send a print job to the printer. If printer
still does not print contact your Customer support representative.
W I N D O W S 53