Network Cable Connection
The graphics on this page depict the rear panel of the DocuPrint printer
with the Network Interface Card already installed. Follow the text for your
type of card to make network cabling connections.
ETHERNET CONNECTION
Ethernet connections are made at the rear of the DocuPrint
printer on the Network Interface Card.
10BaseT twisted pair connections are made using UTP or STP cable
at the RJ-45 (8 pin) connector on the Network Interface Card.
COAX network connections are made with RG-58 cable using a BNC
connector to the COAX connector on the Network Interface Card.
TOKEN RING CONNECTIONS
Token Ring connections are made at the rear of the DocuPrint printer
on the Network Interface card.
DB-9 connections are made at the rear of the DocuPrint printer on the
9 pin sub-miniature D connector.
Twisted pair connections are made using UTP or STP cable at the RJ-
45 (8 pin) connector on the Network Interface Card.
C O N N E C T I N G
T O
Y O U R
N E T W O R K
7