Xerox DocuPrint C55 Supplementary Manual page 133

4. Verify the following items in the Software and Memory area of
the Print Settings page:
Interpreters: PCL or PostScript (depending on your driver).
5. From the server desktop, use the right mouse button and select
Network Neighborhood then with the left mouse button select
Properties from the cascade menu.
6. The Network dialog will appear. Select the Configuration TAB.
7. Check the list of installed network components for the following
items:
AppleTalk Protocol
8. If you have elected to run CentreWare DP you must also have
loaded Novell IntranetWare Client, Novell NetWare Client 32,
a Novell server on the network, and an IPX/SPX Compatible
protocol component. You may also discover printers that have
been assigned a TCP/IP address.
9. As required, install any components not listed and restart the
system.
10. Once rebooted, select the Start button and Settings, then select
the Printers folder. The printers window will appear.
11. Verify that you have selected the correct driver for your printer.
12. Right mouse click on the Printer icon and select Properties.
13. Select the Ports TAB.
14. Verify the AppleTalk name in the Print to the following port list.
If necessary reselect the correct name.
15. Start an application and send a print job to the printer. If printer
still does not print contact your Customer support representative.
W I N D O W S 55