Table of Contents
Advertisement
Printing Banners
For printing banners we recommend you use 20
2
lb. or 70 gm
paper. You can feed up to five sheets
of banner paper through the bypass tray.
After you open your document and select File:
Print, click on the Properties button, then the
Paper/Output tab, then select Banner in the
Paper size listbox. In the paper source list box
select bypass tray.
Tear off the number of sheets you will need to
print your banner (5 maximum).
Tear off the perforated edges, if the paper has any
and fan the stack to separate the edges.
Open the bypass tray , which is located on the
back of the printer.
Place the unattached edge into the bypass tray slot
on the back of the printer. Push the paper down
until resistance is met. If inserted correctly, the
banner feeds into the printer, then pauses until you
click OK to print.
Sheets will continue to feed until printing is
complete.
P R I N T I N G B A N N E R S
1
2
3
4
5
6
Q u i c k R e f e r e n c e G u i d e
2
2.3
Advertisement
Table of Contents
