Electrical Requirements - Xerox DocuPrint 75 Installation Planning Manual

Installation
Input
Device Output Device
Bypass Tray
HCF/Bypass

Electrical requirements

USA/Canada
4-10
The unpackaged dimensions and weights of the printer and
various options are listed below in
account when determining the installation location.
Table 4-1. Unpackaged dimensions
Product
Printer
Bypass Tray
High Capacity
Feeder with
Integral Bypass
Tray
Finisher
Access dimensions to the printer are shown in
HCF/Bypass is a combination of the High Capacity Feeder with
the Bypass Tray.
Table 4-2. Access dimensions
Left Side
Access to
Printer
Finisher 15 in. (381
mm)
Finisher 15 in. (381
mm)
Do not connect the power cord at this time.
The DocuTech/DocuPrint 75 printer requires a dedicated 115V
AC 20 Amp grounded receptacle.
The DocuTech/DocuPrint 90 printer requires a dedicated 208V
AC 20Amp, 50/60hz grounded receptacle.
Table 4-1.
Unpack- Unpackaged Dimensions
aged Weight
353 lb (161 28 x 30 x 40 in.(711 x 762 x
kg)
8 lb(4 kg) 19.25 x 16.5 x 5 in.(489 x
419 x 127 mm
38 lb(17 kg) 19.5 x 17.75 x 22.5 in.(495
x 451 x 572 mm)
92 lb(43 kg) 26 x 25 x 40 in.(660 x 610 x
Right Side
Access to Total Access
Printer
18 in. (457 102 in. (2591
mm) mm)
18 in. (457 102 in. (2591
mm) mm)
WARNING
DocuTech/DocuPrint 75/90 and DocuPrint 75 MX
Installation Planning Guide
Take these into
D x W x H
1016 mm)
1016 mm)
Table 4-2. The
to Printer Printer
69 in. (1753
mm)
69 in. (1753
mm)