Table of Contents
Advertisement
Bosch Sensortec |
6 Software description
Overview
Brief description of the memory layout for the Application Board 3.0
Nordic Semiconductor's SoftDevice S140
Feature-rich Bluetooth Low Energy protocol
stack
160kB reserved space
Key features
Bluetooth 5.0.
USB MTP Firmware
Media Transfer Protocol over USB enables
the transfer of files to and from the device
removing the need of any additional
hardware for data transfer
32kB reserved space
Default Application / User Application
The Default Application enables the use of
the board as a USB to SPI/I2C/GPIO bridge
with some specialized features for event-
based data captures from the sensor.
A custom User Application using the
COINES SDK can be loaded onto the board
for custom tests, prototypes or demos.
768kB reserved space
USB DFU Bootloader
The bootloader supports the Device
Firmware Upgrade standard with the
additional ability for wireless firmware
upgrade using Nordic Semiconductor's DFU
over Bluetooth LE.
64kB reserved space
Modifications reserved | Data subject to change without notice
Arrow.com.
Downloaded from
Application Board 3.0 User Guide
NRF52840's 1MB memory space
Document number: BST-DHW-AN008-00
15 | 24
00000h
28000h
30000h
F0000h
FFFFFh
Advertisement
Table of Contents
