Connecting To The Application Board 3.0 Using Usb; Figure 9 Connecting The Usb Cable - Bosch Sensortec Application Board 3.0 User Manual

Bosch Sensortec | Application Board 3.0 User Guide 17 | 24
Once aligned, press down on the board with both thumbs to fit the Shuttle Board 3.0 onto the Application Board 3.0.
Figure 9: Connecting the Shuttle Board 3.0

Connecting to the Application Board 3.0 using USB

Before connecting the USB cable, ensure that board is switched off.
Figure 10: Connecting the USB cable
Modifications reserved | Data subject to change without notice Document number: BST-DHW-AN008-00
Arrow.com.
Downloaded from