Bosch Sensortec |
7 Getting started
Setup overview
It is recommended to use an ESD safe environment to operate the Application Board 3.0 as depicted in the image.
Connecting a Shuttle Board 3.0 board
Make sure that the pins are aligned correctly to avoid damaging the connector or bending the pins.
Modifications reserved | Data subject to change without notice
Arrow.com.
Downloaded from
Application Board 3.0 User Guide
Figure 7: Application Board 3.0 setup
Figure 8: Aligning the pins of the Shuttle Board 3.0 board
16 | 24
Document number: BST-DHW-AN008-00