Operator Panel & Status Display - Xerox 721 Operator's Manual

Operator Panel & Status Display
1 2 3 4
Wire -Clean Exp -Clean
6
1. Ready Indicator
2. Door Open Indicator
3. Toner Empty Indicator
4. Media Empty Indicator
5. Media Jam Indicator
6. Wire-Clean key
7. Exp-Clean key
8. Media Roll Indicator
9. Select key
10. Cut key
11. Media Jam Location
Indicator
12. Copy Density Indicator
13. Copy Density Key
14. Menu, → → → → , ← ← ← ← , *, Enter,
Online
15. Status Display
XEROX WIDE FORMAT 721P PRINTER OPERATOR MANUAL
The operator panel is located on top of the front side of the printer.
It consists of a graphic display, a message display and several
function keys.
5
Paper Deck
MF
2 3 4
1
D1
D2
Cut
Select
D3
7 8 9 10
Flashes when the printer is warming up, and remains on steady
when the printer is ready to operate.
This indicator flashes and an error code is displayed when a door
is opened, or the Inner Transport Unit is opened.
This indicator flashes when the toner level is low.
When the toner supply is empty, the indicator is on steady and no
more prints can be made.
You can replace the Toner cartridge even if the printer is
operating.
This indicator flashes when the selected media roll is depleted.
This indicator flashes when media is jammed in the printer.
The Charge Scorotron Wire is cleaned when this key is pressed.
The Ready Indicator flashes during the cleaning process.
Lens Array of LED Print Head is cleaned when this button is
pressed. Ready Indicator flashes during the cleaning process.
Displays the selected media roll for lead edge cut when the
SELECT key is pressed.
Press this key to select the media roll desired for a lead edge cut.
Press this key to feed and cut 240mm of the lead edge of the
selected roll.
Indicates the location where Jam has occurred.
The selected Print Density level is illuminated.
Use this key to temporarily increase or decrease the image
density.
These keys are used for changing User Modes described in
Chapter 7. The Online Key is also used to place the printer Offline
and Online.
Error Codes, Status Codes and messages are displayed here.
Exit
PF
Copy Density
D4
13
11 12
PRINTER OVERVIEW
15
Menu Enter
14
Online
13