Printer Console - Xerox 4850 Installation Planning Manual

Printer components and options

Printer console

Sample tray
Dual stacker trays
1 and 2
Feeder tray 1
Feeder tray 2
Printer console
3-2
5. Feeder tray 1
6. Feeder tray 2
The printer console contains message and graphic displays, an
attention light, and Information, Stop, and Continue buttons.
Indicator lights show which feeder tray is active and the paper
size in use.
This output tray is used for sample prints, rejected prints, and
transparencies. The capacity of the sample tray is 100 sheets of
20-pound or 80-grams per square meter (gsm) paper.
Each output stacker tray has a capacity of 750 sheets of 20-
pound or 80-gsm paper (1,500 sheets total capacity). The
alternatives to the dual stacker configuration are the stitcher/
stacker or bypass transport option.
The capacity of tray 1 is 1,000 sheets of 20-pound or 80-gsm
paper.
The capacity of tray 2 is 500 sheets of 20-pound or 80-gsm
paper. Except for capacity, this tray is identical to tray 1.
The printer console contains message and graphic displays, as
well as attention and status indicator lights that alert you to
printer conditions. The indicators and the Information button help
you to solve printer problems. The Stop and Continue buttons
give you temporary control of the printer without interrupting
input processing.
NOTE: The 4850/4890/92C does not provide sample prints
while a job is running, therefore, the Sample Print button has no
effect on the operation.
Installation Planning Guide