Operator Training; Xerox Customer Education; Xerox Font Center - Xerox 4850 Installation Planning Manual

Xerox support services

Operator training

Xerox Customer Education

Xerox Font Center

B-4
Operator training is conducted at your location by your Xerox
system analyst or other identified representative, shortly after the
printer is installed. Training takes two to four hours, depending on
the system configuration. It includes hands-on practice running
basic jobs, performing routine maintenance, and solving
problems. Determine the number of operators you want to attend
the initial training and schedule training dates and times through
your Xerox sales representative.
Additional training classes, such as Advanced Customer Training
(ACT) for operators, teach advanced service and maintenance
skills.
A variety of classes and workshops are available through Xerox
Customer Education.
Xerox offers classes and tutorial documents on various topics
relating to printing systems and document production. For
information about Xerox training courses, or to receive a catalog,
call Xerox Customer Education at 1-800-445-5554 (U. S. only).
Outside the U.S., contact your local Xerox operating company.
Customer Education has a web page where you can obtain
additional information. Its address is:
www.xerox.com/services/training/customer-ed
The Xerox Font Center (or your local Xerox operating company)
can send you samples and catalogs of the fonts available for
your printer.
To receive font samples, obtain price information, obtain
technical support, or order licensed or custom fonts, call:
1-800-445-FONT (3668) between 6:00 a.m. and 5:00 p.m.,
Pacific time.
You can get font information on the web at:
www.font.net
Installation Planning Guide