Xerox 4850 Installation Planning Manual page 83

Sun Ultra 60
workstation
placement
Installation Planning Guide
2
2
Figure 5-2. Sun Blade 1000 fan and vent locations to keep
clear
1. Vents inside the processor
2. Vents in front and back of processor
Do not:
• Do not place the controller monitor on top of the processor.
• Do not allow any piece of equipment to blow warm air into the
air intake vents of the processor.
• Do not place the processor on its side, or in any other
position but the upright, vertical position.
• Do not place the processor or monitor on top of the printer.
Following are guidelines for placement of the Sun Ultra 60
workstation components of the printer controller.
Controller specifications and requirements
2
1
5-5