Table of Contents
Advertisement
Default Image Quality: This feature allows
you to select the default Image Quality mode.
Auto Contrast Adjustment: The copy
contrast range may be adjusted when the
copy image is consistently too light or too dark
in the Auto Image Quality mode.
Paper Trail Edge Deletion: The trail edge
deletion can be turned Off to accommodate
originals that have print to the very bottom
edge. When Off, another 4 mm will copy,
however the image quality may deteriorate as
it gets closer to the bottom edge.
When this feature is On each time the paper
tray is opened edge deletion is disabled for the
first copy. Edge deletion is enabled for the
following copies.
Reduction/Enlargement Preset: This
feature allows you to set a specific preset
reduction or enlargement setting for the
key.
Auto Paper Tray Switching: When enabled,
the copier will automatically switch to another
paper tray when the selected tray runs out of
paper.
Single Pass Feeder Contrast
Adjustment/Automatic Document Feeder:
The copy exposure range may be adjusted
when the copy image is consistently too light
or too dark.
Return to Print Mode: This feature allows
you to select the time it takes for the copier to
return to the print mode after a copy job is
complete.
22
Copying
Feature
Program
Number
5
0 – Auto Exposure *
1 – Text
2 – Photo
6
0 – Lightest
1 – Lighter
2 – Normal *
3 – Darker
4 – Darkest
7
0 – On *
1 – Off
10
50 – 200%
Default 50% *
11
0 – On
1 – Off *
12
0 – lightest
1 – lighter
2 – Normal *
3 – darker
4 – darkest
14
0 – 60 seconds *
1 – 90 seconds
2 – 120 seconds
3 – 150 seconds
4 – 180 seconds
5 – Off - no time out
Option Number
* Factory Setting
Advertisement
Chapters
Table of Contents
