Toshiba MMY-MUP0961HT6P-UL Service Manual page 143

<RBC-AWSU**>
(1)
(2)
(3)
1
Push the [
menu screen
2
Push and hold the [
the [ ] button at the same time to
display the "Field setting menu".
→Push and hold the buttons for more than 4
seconds
3
Push the [
"1. Test mode" on the "Field setting menu"
screen. then push the
" Set" [
→
Pushing the "
sets the test mode and the screen returns
to the "Field setting menu" screen.
Push [ Return] twice, the screen (2)
appears.
4
Push the [
star the test mode.The screen (1)
shown in the leftappears.
(The screen (2) appears when the operatin
is stopped.)
→
Perform the test mode in the "Cool" or "Heat"
mode
Temperature setting cannot be adjusted during
the test mode.
Check codes are displayed as usual.
5
When the test mode is finished, push the
[ ] / [ ] button to select
"1.Test mode" on the
"Field setting menu" screen,then
push the "
The screen (3) appears.
→
Pushing the "
stops the test mode screen and continues the
normal operation.
The test mode stops after 60 minutes and the screen
returns to the normal / detailed display.
- 143 -
Menu] button to display the
Menu] button and
] / [ ] button to select
Set / Fix] button.
Yes" [ Set / Fix] button
ON / OFF ] button to
Set" [ Set / Fix] button.
Yes" [ Set / Fix] button