Table of Contents
Advertisement
BOOK TOC
CHAPTER TOC
SEARCH
OPTIONS FOR RECEIVING A FAX USING THE WORKCENTRE 490CX
Options for Receiving a Fax Using the
WorkCentre 490cx
Using the WorkCentre 490cx, you can receive a fax in one of two ways:
• By allowing the WorkCentre 490cx to answer, receive, and print all
incoming faxes. This process normally involves printing of the incoming
fax. Incoming faxes are stored in memory if they are received when out of
paper or ink, during a jam, or when printing from a PC, or when printing
Reports. When used in this manner, the WorkCentre 490cx is receiving
faxes as a Stand Alone fax machine. There are four distinct ways to
configure the WorkCentre 490cx as a Stand Alone fax machine. (Refer to
Reception
Modes.)
For information and instructions for operation as a Stand Alone fax
machine, refer to
Options for Receiving a Fax Using the WorkCentre
490cx.
• By receiving faxes directly to your computer workstation using LaserFAX
Lite software. This is called PC Fax Reception.
For information and instructions for PC Fax Reception, refer to
Reception.
PREVIOUS PAGE
PC Fax
128
NEXT PAGE
Advertisement
Table of Contents
Troubleshooting
