Table of Contents
Advertisement
BOOK TOC
CHAPTER TOC
SEARCH
11. After Continuous Polling ends, a multi-communication report will be
printed to show the result (if the report is enabled). This report feature is
enabled through the User Options.
Canceling Continuous Polling
Press the Menu
button, then press the 0 + 9 buttons on the keypad. Then
press the Start
button.
1. Select 2. CONT.
2. Select CANCEL, then select 1.YES.
PC Fax Reception
This section provides information and instructions for receiving faxes directly
to a computer workstation connected to the WorkCentre 490cx. Using this
method, a fax is received to the PC without printing it. This process is
controlled by a PC Faxing application called LaserFAX Lite Version 3.5.
What is LaserFAX Lite?
LaserFAX Lite software is an application that is used to enable PC Faxing
using the WorkCentre 490cx. If selected during the installation of the other
software components for the WorkCentre 490cx, the LaserFAX Lite
application is installed automatically.
LaserFAX Lite Installation
To install LaserFAX Lite, no additional special hardware is required. Simply
ensure that the WorkCentre 490cx is connected to the computer workstation
using either the supplied IEEE 1284 parallel cable or a USB cable, and a
phone line has also been connected to the Tel Line input on the left side of
the WorkCentre 490cx.
To install software, including LaserFAX Lite, please see
PREVIOUS PAGE
PC FAX RECEPTION
Installing
Software.
140
NEXT PAGE
Advertisement
Table of Contents
Troubleshooting
