Grizzly T33959 Owner's Manual page 40

Quill & Column Surfaces
Oil Type .... Grizzly SB1365 or ISO 68 Equivalent
Oil Amount ............................................Thin Coat
Lubrication Frequency ...........8 Hrs. of Operation
Items Needed
Mineral Spirits .................................... As Needed
Shop Rags ......................................... As Needed
Move the spindle all the way down to access
the smooth surfaces of the quill. Adjust the table
height as necessary to access the entire length of
the column (see Figures 57–58). Clean both with
mineral spirits and shop rags.
Note: Avoid removing the grease from the column
and quill racks during cleaning.
Figure 57. Spindle moved down to expose quill
surface.
Column
Surfaces
Figure 58. Column surface locations (T33959
shown).
-38-
After cleaning, allow mineral spirits to dry, then
apply a thin coat of oil to the surfaces.
Column Rack, Quill Rack & Pinion
Grease Type .... Grizzly T26419 or NLGI#2 Equiv.
Grease Amount ....................................Thin Coat
Qty
Lubrication Frequency ......... 90 hrs. of Operation
Items Needed
Mineral Spirits .................................... As Needed
Shop Rags ......................................... As Needed
Stiff Brushes ...................................................... 2
Move spindle all the way down to gain access to
quill rack (see Figure 59), then clean teeth with
mineral spirits, shop rags, and a brush.
Clean the column rack teeth (see Figure 59) in
a similar manner with mineral spirits, shop rags,
and a brush.
Quill
Surface
Allow racks to dry, use a brush to apply a thin coat
of grease to the rack teeth, then fully raise/lower
the quill and table to distribute the grease.
Column Rack
Figure 59. Example of quill and column racks
exposed.
Model T33959/60/61 (Mfd. Since 08/23)
Qty
Quill Rack