Page 2
This manual provides critical safety instructions on the proper setup, operation, maintenance, and service of this machine/tool. Save this document, refer to it often, and use it to instruct other operators. Failure to read, understand and follow the instructions in this manual may result in fire or serious personal injury—including amputation, electrocution, or death.
Operating tools in when operating or observing machinery to these areas greatly increases risk of acci- reduce the risk of eye injury or blindness dents and injury. from flying particles. Everyday eyeglasses are not approved safety glasses. Model T32006 (Mfd. Since 01/20)
Page 4
FORCING TOOLS.. Use right tool for job, forming the intended operation, stop and do not force it. It will do job safer and using the machine! Contact our Technical better at rate for which it was designed. Support at (570) 546-9663. Model T32006 (Mfd. Since 01/20)
Always consider safety first, as it applies to your individual working conditions. Use this and other machinery with caution and respect. Failure to do so could result in serious personal injury, damage to equipment or poor work results. Model T32006 (Mfd. Since 01/20)
For your convenience, we post all avail- Grizzly Industrial, Inc. able manuals and manual updates for free C/O Technical Documentation Manager on our website at www.grizzly.com. Any P.O. Box 2069 updates to your model of drill press will be Bellingham, WA 98227-2069 reflected in these documents as soon as Email: manuals@grizzly.com...
Machine Data Sheet MACHINE DATA SHEET Customer Service #: (570) 546-9663 · To Order Call: (800) 523-4777 · Fax #: (800) 438-5901 MODEL T32006 VARIABLE‐SPEED MINI BENCHTOP DRILL PRESS Product Dimensions: Weight................................11 lbs. Width (side-to-side) x Depth (front-to-back) x Height................7 x 10 x 15 in.
Page 8
For Your Own Safety Read Instruction Manual Before Operating Drill Press a) Wear eye protection. b) Do not wear gloves, necktie, or loose clothing. c) Clamp workpiece or brace against column to prevent rotation. d) Use recommended speed for drill accessory and workpiece material. Model T32006 (Mfd. Since 01/20)
A. Chuck: Accepts bits with a diameter between ⁄ " and ⁄ ". B. Depth Stop: Indicates and controls drilling depth. Figure 2. Headstock controls. Figure 1. Location of chuck. Model T32006 (Mfd. Since 01/20)
Often, these items get lost in pack- become familiar with the controls aging materials while unpacking or and operations before starting the they are pre-installed at the factory. tool! Model T32006 (Mfd. Since 01/20)
Page 13
Before cleaning, gather the following: • Disposable rags • Cleaner/degreaser (WD-40 works well) • Safety glasses & disposable gloves • Plastic paint scraper (optional) Model T32006 (Mfd. Since 01/20)
Page 14
2. Tighten pre-installed set screw to secure column in table (see Figure 5). Table Column Figure 5. Location of set screw that secures column in table. Model T32006 (Mfd. Since 01/20)
Page 15
5. Turn variable-speed dial all the way set up tool may result in malfunc- counterclockwise to turn tool OFF. tion or unexpected results that can lead to serious injury, death, or tool/ Congratulations. Test run is complete. property damage. Model T32006 (Mfd. Since 01/20)
Chuck Key set screw from Step 2 to secure depth. Figure 8. Drill bit installed in chuck. Adjusting Headstock Position Lock Ring Figure 10. Depth stop components. The headstock moves vertically and pivots around the column. Model T32006 (Mfd. Since 01/20)
Page 18
Aluminum Mild Steel Carbide Insert Type One-Piece Type 1800 Tenon/Plug Cutters Soft Wood Hard Woods Plastic Brass Aluminum Mild Steel 3/8" - 1/2" 1200 1000 5/8" - 1" Figure 11. Drill bit speed chart (RPM). Model T32006 (Mfd. Since 01/20)
3. Loosen (4) lock nuts shown in Figure 14 to release motor pulley position and Spindle Speed belt tension. The Model T32006 has a variable-speed spindle that operates up to 5000 RPM. This speed range is achieved using the variable-speed dial and the pulley system it controls.
T20451—"Kirova" Clear Safety Glasses T20452—"Kirova" Anti-Reflective Glasses T32026—Drill Press Vise T20456—DAKURA Safety Glasses This vise, designed specifically for the Model T32006, allows you to keep your T20502 hands well away from fast moving bits and cutters. G5978—Drill Press Vise 6"...
Clean/vacuum dust buildup off motor. Quill Surface Cleaning Column Surface Figure 20. Location of quill and column Cleaning the Model T32006 is relatively surfaces. easy. Vacuum excess wood chips and sawdust, and wipe off the remaining dust After cleaning, allow mineral spirits to dry, with a dry cloth.
5. Spindle bearings or spindle at 5. Test rotating spin- fault. dle; grinding/loose shaft requires bearing replace- ment. Replace spindle. 6. Motor bearings at fault. 6. Test by rotating shaft; grind- ing/loose shaft requires replacement. Model T32006 (Mfd. Since 01/20)
Page 23
Spindle overheats. 1. Spindle speed/feed rate 1. Reduce feed rate/cutting speed too fast. (Page 19). 2. Drill operated too long at 2. Allow drill to cool, avoid operating high speeds. at high speeds for extended time. Model T32006 (Mfd. Since 01/20)
Wrench or Socket 7mm ......1 much and how hard the motor is used. Hex Wrench 2mm ........1 Phillips Head Screwdriver #2 ....1 Carbon Brushes (PN PT320060041) ..1 Pr. Model T32006 (Mfd. Since 01/20)
Page 25
Figure 22 to release motor 10. Install drive belt according to desired from pulley system. speed range (refer to Changing Spindle Speed on Page 19 for more information). 11. Install headstock cover. Figure 22. Motor release screw locations. Model T32006 (Mfd. Since 01/20)
7. Install drive belt according to desired space anywhere between straightedge speed range (refer to Changing or pulleys. Spindle Speed on Page 19 for more information). 8. Install headstock cover. Pulleys Figure 24. Checking pulley alignment. Model T32006 (Mfd. Since 01/20)
Technical Support at (570) to a power source. 546-9663. The photos and diagrams included in this section are best viewed in color. You can view these pages in color at www.grizzly.com. Model T32006 (Mfd. Since 01/20)
PT32006012 MOTOR PULLEY REF PART # DESCRIPTION REF PART # DESCRIPTION BUY PARTS ONLINE AT GRIZZLY.COM! Model T32006 (Mfd. Since 01/20) PT32006013 SET SCREW M4-.7 X 8 PT32006028 DOWNFEED LOCK RING Scan QR code to visit our Parts Store. PT32006014 LOCK NUT M4-.7...
WARRANTY & RETURNS Grizzly Industrial, Inc. warrants every product it sells for a period of 1 year to the original purchaser from the date of purchase. This warranty does not apply to defects due directly or indirectly to misuse, abuse, negligence, accidents, repairs or alterations or lack of maintenance.