Who Should Use This Guide - Xerox Document Centre 220 Getting Started

Who Should Use This Guide

This guide is a companion to the Getting Started with Network
Scanning Services guide and is intended to be used by System
Administrators who are setting up network scanning without using
CentreWare Network Scanning Services. CentreWare Network
Scanning Services is intended for use on Windows based
workstations.
There are two other options for setting up scanning services:
l
l
Both of these set up options require the use of procedures in this
guide. For Setting up Scanning Using CentreWare Internet
Services, you will need to complete some processes here, and then
refer to the Getting Started with Internet Services guide to complete
the set up. All of the procedures for setting up Native Scanning are
included here.
Whether you are setting up Native Scanning or Scanning Using
CentreWare Internet Services, there are two options for file transfer.
They are:
l
l
Procedures for both of these file transfer options are contained in
this guide.
NOTE If you will be using Xerox's CentreWare Network Scanning
Services to set up scanning on the DC220/230/332/340ST, refer to
the Getting Started with Network Scanning Services guide now.
To use the procedures in this guide effectively, you must have
experience working in a network environment. You must also have
access to the network and possess Supervisor (Administrator) rights.
You may also require documentation provided by network and
client workstation vendors.
Page 1 - 2
Setting up Native Scanning
Setting up Scanning Using CentreWare Internet Services
Setting Up Scanning - NetWare (NCP)
Setting Up Scanning - FTP (File Transfer Protocol)
Companion to Getting Started with Scanning Services