Xerox Document Centre 220 Getting Started page 34

4. Enter the Login Name.
CAUTION The Login Name is the name of the Scan User account. It should
be entered exactly as you entered it when you created the account.
If the names do not match exactly, the DC220/230/332/340ST will
not log into FTP Services. Remember that some FTP Services are
case-sensitive.
5. Enter the User Password:
CAUTION This is the Password for the Scan User account. It should be
entered exactly as you entered it when you created the account. If
the passwords do not match exactly, the DC220/230/332/340ST
will not log into FTP Services. Remember that some FTP Services
are case-sensitive.
6. Press [Save] and then press [Save] again when finished to return
7. If desired, press [Repository 1] and [Repository 2,3, 4] (as
8. Press [Filing Policy] and choose [Overwrite], [Append], [New
Page 3 - 6
B. Select [Save] when finished.
A. Press [Login Name].
B. Press [Edit] and use the keypad on the screen to enter the
name of the user account for the scanner.
C. Press [Save] and then press [Save] again when finished.
A. Press [Password].
B. Press [Edit] and use the keypad on the screen to enter the
password. If no password was assigned, use the left arrow
key to delete the default password.
to the Scan to File Setups screen.
needed) to set up Repositories 1 through 4.
Exact] or [New Auto Generate].
Overwrite will replace the previous document with the
last scanned document.
Append will add each document scanned to the
repository without deleting any previously scanned
documents.
Companion to Getting Started with Scanning Services