Xerox DocuColor 3535 Color Manual page 83

3
3-19 Color Editor
12. If the output profile contains no edit points, continue to step 14.
If the output profile contains edit points from a previous AutoGray session, choose an
action from the following warning.
reuses edits points from a previous session in an attempt to make them more
Refine
accurate. Refine is optional; use it only if the gray balance in your test document still
needs improvements after the first AutoGray session. If two Refine applications cannot
fix the situation, it is probably because your test document is not correctly addressing
the output profile, or because the output profile that you are editing does not
adequately describe the actual copier and printing conditions. Clicking Refine more
than twice is not recommended.
starts a fresh AutoGray session by first removing all edit points from a previous
New
session. We recommend clicking New when you have applied Refine more than twice.
13. If the output profile contains edit points that were entered by a user, click Proceed to
remove the points and continue with the AutoGray adjustment.
Proceed starts a fresh AutoGray session by first removing all user edit points. This is
because AutoGray cannot modify user-entered points.