Xerox DocuColor 3535 Color Manual page 64

Fiery network controller

Hide thumbs Also See for DocuColor 3535:

Table of Contents

2-28 Color Calibration

5. In the Auto Gradation Adjustment screen, select the appropriate option:

• Print Job—to calibrate the Line Screen calibration set.

• Network Controller 1 or Network Controller 2—to calibrate the

Dot Screen calibration set.

6. Follow the on-screen instructions to load the print media and press Start.

7. Follow the on-screen instructions to place the printed test pattern on the copier glass

and press Start.

8. When the scanning and calibration is complete, choose Close until the System Settings

screen appears.

9. Select Exit.

Table of Contents