Xerox DocuColor 3535 Color Manual page 79

3
3-15 Color Editor
You should adjust points in this way only after you have entered the Dot Gain
N :
OTE
and Brightness values.
For greater precision, type percentages in the Input and Output fields or use the arrow
keys on the keyboard to adjust the curve. To use the arrow keys, you must first click the
curve to establish an anchor point that serves as a reference.
9. For an output profile, set maximum densities of the C, M, Y, and K channels.
Enter the maximum densities, called D-Max values, of individual colors for profiles
that support density settings. D-Max settings are not available when you edit
Simulation profiles in Master mode.
10. When you are finished, click Save and enter a name for the new profile.
The new custom profile is saved to the Fiery with the new name. If you edit one of the
press standard targets (for example, SWOP-Coated, DIC, or Euroscale), consider
including the original name as part of the new target name (for example, DIC-new) to
help you remember the source of the new target.
Preset default profiles are locked and must be saved with a new name.
N :
OTE
For Windows 2000/XP and Mac OS computers, custom profiles must be linked to one
of the 10 predefined custom profile names (Simulation-1 through Simulation-10 for
Simulation, or Output-1 through Output-10 for Output) to be accessible from the
printer driver. Create as many custom profiles as you want, but a maximum of 10 are
available from the printer driver at any one time. For information on linking custom
profiles to the predefined custom profile names, see
you are using the printer driver for Windows 9x/Me/NT computers, custom profiles
will appear in the driver window without being associated with a predefined
profile name.
If you set a custom profile as the default, you can access it from the printer driver
without linking it to one of the predefined custom names. Select Printer's default from
the printer driver.
"Defining profiles" on page 3-7. If