Xerox DocuColor 3535 Color Manual page 57

Fiery network controller

Hide thumbs Also See for DocuColor 3535:

Table of Contents

2-21 Using the EFI Spectrometer ES-1000 or EFI Densitometer ED-100

If necessary, choose the appropriate COM port for the ES-1000 or ED-100 from the

Port menu.

When you click Start, the Measurements window appears. Directions for measuring

the patches appear in the Status area.

9. Place the ES-1000 or ED-100 over the speciﬁed patch on the Measurement Page,

making sure to center the sample aperture over the patch. Press Measure to take

the measurement.

For a more accurate measurement, place several plain sheets of paper beneath

OTE

the Measurement Page to block underlying colors from being read by the instrument.

If you have speciﬁed multiple clicks per patch, continue pressing Measure to take the

required number of measurements. We recommend that you move the ES-1000 or

ED-100 slightly after each measurement, while keeping the sample aperture within

the patch.

Table of Contents