Xerox DocuColor 3535 Color Manual page 75

3
3-11 Color Editor
Color Editor also has several Edit Modes for editing simulations:
• —Create a custom master simulation that affects all print jobs to which it is
Master
applied, unless a linked simulation exists for the selected combination of simulation
profile, simulation method, and output profile.
• ,
Quick Full (Source GCR)
Linked simulations affect the print job only if the corresponding simulation profile,
simulation method, and output profile are selected. If you choose an output profile
and simulation method for which you have created a custom linked simulation, that
simulation is applied automatically to the job. If you choose a simulation method or
output profile for which there is no custom linked simulation, the master simulation
is automatically applied. For detailed information about simulation methods,
see page 1-10.
If you made edits to a master simulation after you created a linked simulation,
N :
OTE
the edits are not applied to the linked simulation.
T
O EDIT A SIMULATION PROFILE IN
C
OUTPUT PROFILE IN USTOM
1. Start ColorWise Pro Tools and click Color Editor.
2. Choose Simulation or Output from the View menu.
Simulation lists the simulation profiles resident on the Fiery, and Output lists the
output profiles resident on the Fiery.
, or
Full (Output GCR)
M M
ASTER ODE OR AN
M
ODE
—Create custom linked simulations.