Xerox DocuColor 3535 Color Manual page 50

2
2-14 Color Calibration
12. Repeat the measurement process for the magenta, yellow, and black strips.
A check mark appears on the circle of the color just read, and the Status field indicates
the color was measured successfully.
Click Previous or Next to reverse or advance to another step in the measurement
sequence.
13. When the Status field indicates that all four color strips have been read successfully,
click Accept Measurements.
14. In the Measure dialog box, click OK.
15. Click Apply in the Calibrator window to implement the new calibration set.
16. Click OK in the Information dialog box.
This completes the Fiery calibration process.