Reduce/Enlarge - Xerox CopyCentre C32 Quick Reference Manual

Spode QRG.book Page 6 Tuesday, May 13, 2003 10:51 AM

Reduce/Enlarge

The Reduce / Enlarge option provides a variety of reduction and enlargement
options. Originals placed on the Document Glass or sent to the machine
electronically can be reduced or enlarged between 25% to 400%. Originals fed
through the Document Handler can be reduced or enlarged between 25% to 200%.
The preset Reduce/Enlarge options that appear on the Copy tab can be set in Tools
mode.
Options:
The following options appear after pressing the More... button on the Copy tab.
Use this option to proportionately reduce or enlarge the output image in both
N
ORMAL
directions by the % selected.
Normal options are as follows
A
% S
ET
P
RESET
P 3-6
AGE
Produces an image on the copies the same size as the image
100%
on the original.
Proportionally reduces or enlarges the image on the copies
based on the size of the original and the size of the selected
%
UTO
output paper.
Use this option to select the percentage of reduction or
enlargement required using the keypad on the control panel.
To use the keypad, select the box displaying the current
25 - 400
reduce/enlarge percentage.
The scroll buttons can also be used to adjust the reduce/
enlarge percentage, in 1% increments.
The most commonly used reduce/enlarge percentages have
been provided as preset options. These preset options can be
O
PTIONS
customised to meet individual needs.
X C C
EROX OPY ENTRE
/W C P 32/40 C
ORK ENTRE RO OLOUR
Q R G
UICK EFERENCE UIDE