Reduce/Enlarge - Xerox CopyCentre C165 Quick Reference Manual

Reduce/Enlarge

The Reduce / Enlarge option provides a variety of reduction and enlargement
options. Originals placed on the Document Glass or sent to the machine
electronically can be reduced or enlarged between 25% and 400%. Originals fed
through the Document Handler can be reduced or enlarged between 25% and
200%.
Options:
Use this option to proportionately reduce or enlarge the output image in both
Normal
directions by the % selected.
Normal options are as follows:
% S
Use this option to adjust the height (Y) and the width (X) dimensions for reduction
Custom
or enlargement of each dimension independently.
NOTE: Output will NOT be reduced or enlarged proportionally.
Page 4-8
Produces an image on the copies the same size as the image on the
100%
original.
Proportionally reduces or enlarges the image on the copies based
A %
UTO
on the size of the original and the size of the selected output paper.
Use this option to select the percentage of reduction or enlargement
required using the keypad on the control panel. To use the keypad,
select the box displaying the current reduce/enlarge percentage.
NOTE:
25 - 200 / 400
ET
and 400% when using the Document Glass.
The scroll buttons can also be used to adjust the reduce/enlarge
percentage, in 1% increments.
The most commonly used reduce/enlarge percentages have been
provided as preset options. These preset options can be
P O
RESET PTIONS
customi
200% will be displayed when using the Document Handler
z
ed to meet individual needs.
Quick Reference Guide