Workcentre M165/M175 - Xerox CopyCentre C165 Quick Reference Manual

WorkCentre M165/M175

Control Panel
(Touch Screen and
Numeric Keypad)
Shelf
Bypass Tray
(Folds up when
not in use)
Paper Trays 1 & 2
The following options are available for the WorkCentre:
Offset Catch Delivers output either face up or face down, collated or uncollated. Each set or stack
Tray
will be offset from the previous to enable easy separation. Fitted instead of a
finisher.
Finisher There are 3 finishers available: the Office Finisher, Advanced Office Finisher and
the Professional Finisher. All finishers deliver output to the Top Tray by default
when scanning from the document glass, or to the Stacker to collate, stack, staple
and, if available, hole punch your chosen output. In addition a walk-up off-line
stapler is also available.The Professional Finisher can also fold and staple output to
produce booklets.
Your chosen finisher is fitted instead of the Offset Catch Tray.
Hole Punch This option is available if your machine is equipped with any of the three finishers.
The kits available are 2 hole or 3 hole long edge feed or 2 hole short edge feed for
legal size paper. Each sheet is punched individually, so there is no limit to the
number of sheets in the set. Additional Hole Punch kits can be purchased as an
option.
Foreign Enables the attachment of a third party access and accounting device, such as a
Interface
card or coin operator.
Device
Fax Line 1 Provides a single telephone line connection.
Quick Reference Guide
Document Handler
Document Glass
(under the Document
Handler)
Office
Finisher
Paper Trays 3 & 4
(High Capacity
Feeder)
Page 2-5