Rear Roller - Baroness TDA1200 Owner's Operating Manual

Rear Roller

1. When using the rear roller
When operating the coring with spike tines,
the machine presses the lawn surface by
using the rear roller.
[1] Remove the snap pin, and remove the flat
head pin securing the rear roller from the
hole B.
[2] Insert the flat head pin into the hole A on
the roller holding plate, and insert the snap
pin to release the rear roller.
[3] Do the same operation on the opposite side
to release the rear roller.
2. When not using the rear roller
When operating the coring with side open
tines, the machine does not press the grass
and soil removed by the side open tines by
raising the rear roller.
[1] Remove the snap pin, then the flat head
pin.
[2] Raise the roller hanger to the appropriate
height where the rear roller cannot press
the grass and soil removed by the side
open tines.
[3] Insert the flat head pin into the hole B on
the roller holding plate and insert the snap
pin to release the rear roller.
[4] Raise the opposite side in the same way
and fix it. Do the same operation on the
opposite side to fix the rear roller.
3
4
5
Rear Roller_001
1 Rear roller
2 Roller holding plate
3 Snap pin
4 Flat head pin
5 Roller hanger
Rear Roller
2
1
E816ED63
TDA1200・TDA1600
Description of Functions
Page 4-3