Table of Contents
Advertisement
Installation Overview
Pole Mounting the AP with Horizontal Kit
The AIR-MNT-HORZ1= mounting kit contains a mounting L-bracket and components for both pole mounting
and wall mounting. Using this kit, you can install the AP on a pole or mast. It supports metal, wood, or
fiberglass poles from 2 to 5 inches (51 to 127 mm) in diameter.
Figure 65: Pole Mounted Horizontal Kit (AIR-MNT-HORZ1=)
1
2
3
4
5
Before you begin
Ensure that you have the following materials before beginning to mount the AP horizontally to a pole:
Table 10: Materials Needed for Mounting the AP using AIR-MNT-HORZ1= Kit
Materials Required
Wall/Pole Mount L-Bracket
Solar Shield
L-Bracket
Solar Shield
(4) M6 x 12–mm Hex-head Bolts
(4) 8-32 x 0.62" Phillips Pan Head Screw
(2) Adjustable Band Clamps 2 to 5 inch (51 to 127 mm) Dia. passing through the bracket slots
Cisco Catalyst 9124AX Series Outdoor Access Point Hardware Installation Guide
Pole Mounting the AP with Horizontal Kit
Supplied in the
Kit?
Yes
Yes
57
Advertisement
Table of Contents
