Table of Contents
Advertisement
Installation Overview
Figure 54: Mounting Bracket Dimensions
Before you begin
Ensure that you have the following materials before beginning to mount the AP to a wall:
Table 3: Material Required to Mount Access Point to a Wall using AIR-MNT-VERT1= Kit
Materials Required
Ground lug and screws (provided with the access point)
Wall Mount Bracket
Four M6 x 12–mm Hex-head Bolts
Crimping tool for ground lug, Panduit CT-720 with CD-720-1 die
Four wall mounting screws
Four wall anchors (specified for all material)
Drill bit for wall anchors
Electric drill and standard screwdriver
#6 AWG ground wire
Shielded outdoor-rated Ethernet (CAT5e or better) cable
Grounding block
Grounding rod
10–mm box-end wrench or socket set
Cisco Catalyst 9124AX Series Outdoor Access Point Hardware Installation Guide
Vertically Mounting the AP to a Wall
Supplied in the
Kit?
Yes
Yes
Yes
No
No
No
No
No
No
No
No
No
No
41
Advertisement
Table of Contents
